We are able to use almost any thermostat type or brand in conjunction with our under floor heating cables. Ideally we try to match the thermostat cover plates with the switch-gear being used in the rest of the house. Aesthetically this gives you a far better finished look.
We can in certain cases have one brand of cover plate engineered to fit another brands Thermostat. Although there are many brands of thermostats they can all be broken down into two basic categories:

	Standard Analog Thermostat. Here normally through a small dial, you set the thermostat to your specific required temperature. This desired temperature is then static and will remain at that chosen level as long as the system is turned on or until a different temperature is chosen.
	Digital Programmable Thermostats. These thermostats give you the option of dividing your days into segments and allowing you to set the ideal temperature for that particular time of day. As an example you can program the thermostats to reduce the desired temperature from 22°c down to 17°c during the day when no one is at home. This amounts to significant reduction in energy costs.

4 Event Clock Thermostat

An “all-in-one” clock thermostat for electric underfloor heating control where optimum comfort temperature and minimum energy consumption are required.

• The thinnest clock thermostat on the market, only 20 mm, making it easy for the installer.
• Easy animated menu navigation and programming in 8 different languages.
• The programming is now child’s play, ensuring the fastest and easiest setup.
• Set and forget! Adaptive control ensuring comfort temperature at the required time.
• Compatible with existing floor sensors, making it the best thermostat for renovation purposes

Thermostat Control
Electronic thermostat for control of temperature by means of a sensor placed either externally in the floor or built into the thermostat. OCD4 can also operate in regulator mode (option). This is useful for renovation purposes where it is not possible to use a floor sensor.

Built-in Clock - Calendar with Power Backup
Comes with built-in 4-event program for automatic comfort and setback temperature. The clock and calendar have built-in battery backup, so the user never has to care about setting the clock after power interruption.

Graphical Display
Unique user interface with new animated graphical menus and button based navigation for easy programming and readout of data.

Monitoring of Energy Consumption
Total switch-on time in percent and calculated cost can be read out for the last 2 days, 30 days or 365 days. Overall energy consumption can thus be monitored.

Factory-set Events
The thermostat is delivered with factory-set programs as detailed below:

Individual Programming of Events:
The factory-set periods and/or temperatures can be changed according to requirements.

Furthermore, the following programs can be selected:

• 4 events for 5 days and 2 events for days 6 7
• 4 events for 6 days and 2 events for day 7
• 4 events per day

Comfort Mode
The room temperature can be temporarily changed for asingle event. The comfort mode temperature is reset after a user selected number of hours. The thermostat will then return to the scheduled event program.

Manual Mode
The scheduled event program can be cancelled, e.g. during holidays, and the temperature set for frost protection purposes instead, e.g. to 5°C. The new setpoint will remain active until manual mode is cancelled.

<< Back to Products